Previously Restored Pianos

SHOP PHOTOS AND PROJECTS

We are please to share some of the projects completed over the years.  Thank you for your interest!

A fully restored piano offers the consumer a superior product at tremendous savings.

MYTHOLOGY

 is a brand new Steinway concert grand that was hand painted by local Haida artist Jay Simeon.
We were hired to detail the paintings and put a finish over the art work. It took us 5 weeks of full time labour to finish our part of the job.
The paint is acrylic made form ground argillite, a stone found exclusively in Haida Gwaii, British Columbia.
It has officially been added to the Steinway art case collection designated by Steinway & Sons

PIN BLOCKS AND SOUNDBOARDS

REPAIR AND SHIMMING OF OLD SOUND BOARD

IT IS NOT ADVISABLE ON OLDER PIANOS WITH CRACKED OR FLAT SOUND BOARDS TO SHIM THE BOARDS. IT IS MORE COST EFFECTIVE TO REPLACE THE BOARD, BECAUSE IT WILL RENDER LONGER LIFE TO THE INSTRUMENT.
Mason and Hamlin sound board. This board has too many cracks and no crown, therefore it needs to be replaced.
This Steinway sound board was very dirty however it was very restorable.
Scraping off the old finish.
We glue our shims in with spring loaded go bars.
Close up photo of gluing the shims.
Further sound board scraping with pin block already installed. Two cracks were shimmed and the bridges are now being rebuilt.
Spruce shims are now fit for gluing. This sound board has too many cracks. We would rather replace the board, but upon customer request we shimmed it The piano has an amazingly good tone.
This is the above sound board with the shims glued in, planed and sanded.
Spraying the sound board.
Sprayed sound board with a Steinway decal applied.

REMOVAL AND REPLACEMENT OF A NEW SOUND BOARD
1899 HEINTZMAN GRAND

Removal of the sound board from a Heintzman grand.
Sound board removed from a Heintzman grand.
View of the old board and the piano.
Manufactured sound board panel with ribs is kept in the hot box. This view shows how the board is dry fitted.
Down bearing has to be set correctly. Down bearing is the height of the bridges in relationship to hitch pins and agraffe's.
own bearing has been established and the board is removed from the piano.
Bridges are now hand plained  to the correct down bearing height.
Bridges are now hand plained to the correct down bearing height.
Drilled bridges are ready for careful notching by hand.
Laser guided positioning
.
Laser guided positioning .
Notching and bridge pin installation is done outside of the piano.
Completed bridges are then permanently installed on the board outside the instrument.
Back of the board is sprayed before installation. Upper side of the board is sprayed once installed.
The sound board is glued permanently in to the rim of the case.
Soundboard with new finish.
Finished Heintzman with a new soundboard.
Heintzman with a new soundboard.

VARIOUS SHOP PHOTOS

New soundboard in a Chickering.
New board Chickering underside.
1907 Steinway new board and pinblock Model "A".
Same Steinway "A" as previous.
New soundboard is in a Mason & Risch.
New soundboard is in a Mason & Risch.
New soundboard is in a Mason & Risch.
Strung Mason & Risch.
Strung Mason & Risch.
New Bridges for Mason & Risch.
New Bridges for Mason & Risch.
Pianos in progress and waiting for further work.
Plates to be refinished. They are sanded and primed.
Sprayed plate.
Repainted lettering.
View of a restored Everett grand piano.
Restored action for a Steinway concert grand We always install Renner action parts manufactured in Germany
Partial shop picture.
This picture shows how the keys can be cleaned.
Old set of upright keys that need to be replaced do to very wide spaces between keys.
New Keys.
New key frame.
Installed in a D.W. Karn.
Gluing on sharps.
Disassembled grand piano action.
Drilling new hammers.
Gluing on new hammers.
Rod in 1991 pre voicing new hammers.
Rod in 1988 Rough "Bench" Regulating.
Figuring out the geometry for the new action parts.
Restored action for a Steinway concert grand We always install Renner action parts manufactured in Germany.
Key frame with new felts.
Preparing to install white key tops.
Another photo of the new action parts.
Polished brass hardware for a Steinway concert grand.
Applying the stain to a Mahogany Heintzman grand.
Stained mahogany Gerhard Heintzman ready for the finish to be applied.
Steinway just stained ready for lacquer.
Finished cabinet.
Mason & Risch with plate installed.
Mason & Risch out of the spray booth.
Refinished Walnut Gerhard Heintzman.
Broadwood grand stripped and sanded ready for the stain.
Broadwood with new soundboard.
Broadwood finished.
Eileen Verhnjak at work.
Yamaha uprights have a silk cords attached to the springs on the butts. In about fifteen years (depending on the climate circumstances) they disintegrate and must be replaced. Just about all dealers that sell used import Yamahas do not replace silk cords. Without silk cords the action will not work properly.
In order to replace silk cords one must remove the butts with flanges and the whippens. . This job requires approximately 10 hours.
Art case Chickering legs showing the difference between striped and non stripped legs. These legs are 100 years old.
Striped sanded and stained.
Leg installed just before staining will commence.
Cabinet is now stained ready for lacquer.
Piano is finished.
Inside the spray booth.
New legs for a rebuilt Hamburg Steinway "B".
Forming 14 feet of custom made rosewood moulding.
Gluing and clamping the moulding to the rim.
Steinway 1885 rosewood refinished. The moulding around the rim was applied to this piano.
Steinway on its way home.
View of a very badly split bass bridge. This bridge must be replaced.
Replaced bass bridge on a Gerhard Heintzman.
New bass bridge ready for new bridge pins.
New bass bridge ready for new bridge pins.
Beware of wet like water marks around the tuning pins. This is a sure sign that the "pin doping" had been done by some technician. This type of treatment is done in order to swell up the wood and tighten the tuning pins. However it does not last long and also destroys the pin block.
Plate removed. It clearly shows a permanently damaged pin block that needs replacement.
Movers hard at work.
Ouch. I am to be moved.
Our movers can overcome all challenges.
Our movers can overcome all challenges.
Knabe being delivered.
U. F. O. ?
Rod lecturing how to replace used ivory key tops.
All new action parts on a 1890's Steinway.
Rebuilt Heintzman upright action.
Beautiful Heintzman grand in the rebuilding stage.
Stripped and sanded.
Finished ready to be shipped.